Kuni Maskinfabrik A/S
Holmbladsvej 2
DK-8600 Silkeborg

+45 8682 3944
kuni@kuni.dk

Kuni Maskinfabrik A/S
Holmbladsvej 2
DK-8600 Silkeborg

+45 8682 3944
kuni@kuni.dk

Adhesive machines and adhesive mixers for the wood industry

 

Manufacturing and sales

KUNI Maskinfabrik A/S is the country’s leading manufacturer of adhesive machines and adhesive mixers for the wood industry.

The high demands that the wood industry have for precision, speed and quality put equal demands to the machines we make.

We hold many years of experience within manufacturing, service and maintenance of adhesive machines and adhesive mixers and therefore it is possible for us to supply the equipment and the machines to meet these demands.

Please contact Palle Nielsen by e-mail pn@kuni.dk or phone +45 8682 3944 to hear more about KUNI’s adhesive machines and adhesive mixers.

DOWNLOAD DATA SHEETS

We have collected a good number of data sheets for adhesive machines and adhesive mixers respectively.
To be found below:

Adhesive application

4-roller dosing applicator
Type LMD-F

Download data sheet here

4-roller dosing applicator
Type LMD-F HD

Download data sheet here

4-roller dosing applicator
Type CN 81

Download data sheet here

4-roller dosing applicator for hardener
Type LMD-FH

Download data sheet here

2-roller dosing applicator
Type C 81

Download data sheet here

2-roller dosing applicator
Type AM 300

Download data sheet here

Separate edge application unit
for parquet
Type LRR-2

Download data sheet here

Vertical adhesive applicator
Type LMV 60

Download data sheet here

Vertical adhesive applicator
Type LMV-H 100

Download data sheet here

Roller brushes and cooling units

Roller brush
Type CB 81

Download data sheet here

Roller brush
Type CB 81 HD

Download data sheet here

Cooling units –
Type ECA 001, ECA 003
and ECA 004

Download data sheet here

Adhesive mixers

EPI adhesive mixer
Type LMX E

Download data sheet here

Adhesive mixer
Type LMX

Download data sheet here

Adhesive mixer
Type LMX for installation on applicator

Download data sheet here

Diaphragm pumps

Wagner-Colora S.R.L. .has been manufacturing and supplying pneumatic pumps for the lacquer industry since 1979. Among other things, the well-known double diaphragm pump PM 500, which is used in most industrial lacquer plants.

Today WagnerColora S.R.L. is one of the world’s largest manufacturers of air powered pumps, diaphragm and piston pumps for any purpose.

  • Complete painting systems
  • Automatic change of color
  • 2-component plants

Double diaphragm pump – type ZIP 52/ZIP 80

Spare parts are still supplied for diaphragm pumps – Type PM 120 and PM 500

For more information on Wagner-Coloras products we refer you to their home page www.wagnercolora.com or contact us for additional information!

Please contact:
Hans Jørgen Madsen hjm@kuni.dk or by phone +45 8682 3944 to learn more about diaphragm pumps from KUNI.

Double diaphragm pump
type ZIP 52/ZIP 80

Download data sheet here